Code Compliant Offgrid Solar Power System:
Sol Ark All-in-one

Features of the Sol Ark:

  • Two Built-In 500V MPPT Charge Controllers
  • 1 – 6 PV Strings
  • Battery Disconnect
  • 48V Battery Input
  • Auto-Generator Start, works with any generator that has 2 wire start.
  • Rapid Shutdown Signal
  • Built in Arc Fault and Ground Fault detection
  • Current Sensors Included
  • Battery Communication for LiFePO4.
  • Works with any battery type, FLA, AGM, SLA, LFP.
  • PV Disconnect
  • Wiring Knockouts an & WiFi
  • 50A Breakers:
    • AC In/Out, AC Load Out
    • AC Gen In/Smart Load Out
  • Remote programmable monitoring and configuration included
  • Next Generation Efficiency
    • 93% RTE – The most efficient in the world in/out of batteries
  • 120/240V single/split phase & 120/208V three-phase in the same unit
    • Stackable up to nine in parallel
  • Easy AC-couple retrofit
  • No microinverters, no optimizers necessary on new installs
  • All-in-One box
    • Easy plug ‘n play install and inventory management
    • Everything needed for Grid Tied, Hybrid, or Off-Grid inside
    • Manages power from Solar, Battery, Grid, Load, and Generator simultaneously
  • 10-Year Standard Warranty Included
    ​

Click Here to Purchase a 5K/8K/12K Sol Ark

Click Here to Purchase a 15K Sol Ark (backup your entire house in one easy step)
A typical DIY offgrid system can be fantastic for running a cabin or RV. But if you wish to also be connected to grid, and/or backfeed the grid with excess power that your system creates, you need to spend some money and get the right product for the job. You will need a UL listed device that can do everything. Currently, there is only one device on the market that does this. You can pass inspection with this unit virtually anywhere on earth, and it is very powerful. 

You need to hire an electrician to install it. They will ground it properly, connect the solar array to code, and create a code compliant connection to grid. I do not recommend people attempt this on their own. The offgrid inverters are fun and great for DIY folks, but the moment you touch the grid, things change. And you need to hire a professional. 

Expensive, but very easy to use!

Just buy the unit online and hire an electrician to install it. That is it. This unit can do grid tie only, offgrid and net zero export. And sol ark will set it up for you remotely. The cost is justified if you want something that will last for decades and have zero issues. 

Use the link below to purchase the Sol Ark from Current Connected:
Click Here to Purchase a Sol Ark

New Kid on the Block: EG4 18KPV

Want the same features of the Sol Ark 15K but for a lower cost? Check out the EG4 18KPV. This unit is what I am running in my shop, and I love it! 

The 18KPV is designed to work with the EG4 Powerpro Battery. This battery is a better value than server rack batteries! And they look a lot better and have more features including bus bar and quick connects, communications and 8,000 charge cycling rating.

The 18KPV has grid interactive features and is code compliant in all 50 states.  

​Features of the 18KPV:
  • 18,000W PV input, 12,000W continuous output
  • Stackable - Parallel multiple units together
  • Closed loop communication with EG4 batteries
  • Overload, short circuit & over temperature protection
  • Line Balancing

Click Here to Purchase
the 18KPV

or Click Here to see 18KPV Packages with the Powerpro Battery