Automatic Transfer Switch for Offgrid Solar

If you have an off-grid solar power system AND grid power, use this switch to power your devices until the solar battery is low, then it will switch to grid power. This is a great switch to use if you have a stationary RV and wish to use both solar power and grid power. You can also program the cut-off voltage (the battery voltage when it switches to grid power), so that your batteries last a long time. You can also program the reconnect voltage as well. 

Very easy to setup! Run some extension cords to the terminals and plug it into your system. It will turn on when you connect your solar battery to the terminals. It can work with 12/24/48 volt solar power systems

Click here to buy it on amazon.com

Automatic Transfer switch for Generator/Shore Power/Inverter (2 inputs only) for RV's

Not as sophisticated or dedicated to solar as the last one, but you can hook up multiple inputs. Lots of options here!
  • Can handle 2 sources of 30 amps at one time
  • Made for use with inverter, shore power or generators
  • Delay switch for use with generators
  • Comes with knockouts for easy and professional installation
  • Single relay

Click Here for a cheap price

Manual Transfer Switch for Solar Systems

This switch is technically automatic, but it will only kick back to grid power when you turn the inverter off. So its only semi-automatic, unless you can manually set the disconnect threshold on your inverter, and the reconnect voltage. If you can, you can use this. If you want to save time, use the one I mentioned at the top of this page.

Click here for a cheap price